Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: help? Speedo sending module fried

  1. Well I got my speedo/odo to start working again by just jiggling the wire at the attachment point to the sensor. Clearly something that is going to fail again going forward! At least the sensor is working. The wire is cheap, if not easy to rewire through the firewall and dash!

  2. #12
    Join Date
    Mar 2015
    Location
    South East United States
    Posts
    87
    Quote Originally Posted by RossoDiamante View Post
    Well I got my speedo/odo to start working again by just jiggling the wire at the attachment point to the sensor. Clearly something that is going to fail again going forward! At least the sensor is working. The wire is cheap, if not easy to rewire through the firewall and dash!
    Hoover has replacement sensors I believe. May need to just "punt" and get a new one. As mentioned make sure the new sensor is close but not touching the toothed wheel, the wheel is clean and undamaged etc. Good luck!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •